Looking for the ultimate shock upgrade for the Toyota Tundra? Fox's Factory Race series shocks are the answer. A huge step up over the squishy factory units, the Factory Race series shocks feature massive 2.5-inch diameter bodies. That significant increase in volume over the OEM shocks allows for more fluid and a bigger piston area for better cooling and control. Also keeping shock fluid temperatures in check are big 2.5-inch diameter remote reservoirs. Fox's trick DSC adjusters allow for adjustment of both high-speed and low-speed compression while the front coilovers use high-quality Eibach springs and are adjustable for 1-3 inches of lift. Compression and rebound valving are also specific to the Toyota Tundra for a perfectly dialed-in ride. Throwing these Fox Factory Series shocks onto your Tundra will be one of the best modifications you will ever make to it.
- Larger 2.5-inch diameter zinc plated seamless steel body for increased fluid capacity
- 2.5-inch diameter smooth-bore remote reservoir for increased cooling
- DSC Adjuster for control of both high-speed and low-speed compression
- Coilovers use application specific Eibach racing springs
- Larger 6061-T6 hard-anodized high-flow piston for maximum damping control
- 7/8-inch hard chrome-plated steel shaft
- JM92 Advanced Suspension Fluid for improved performance at variable temperatures
- Coilovers include a ride-height adjustment ring
- Valved specifically for each application
- A massive improvement in rebound and compression damping for a controlled ride in any terrain
- Adjustable for 0-3 inches of lift
- Front Pair Fox Factory Race Series Shocks w/ DSC Adjusters
- 880-06-947 x 1 Pair (Front 0-3”)
- Q: What height do the shocks come out of the box?
- A: Typically, Fox Shocks will be pre adjusted to the highest setting per application. Example if the coilover is 0-3”, our experience shows that out of the box the vehicle will net close to 3” of lift. Fine tune adjustment can be made once installed.
- Q: Will these shocks work on a 2wd application?
- A: Yes, the shocks will work for both 2wd and 4wd applications
- Elevate Billet Uniball / Heim UCA – Part Number: 1006
- Stage 1 Lift w/ Performance Series – Part Number: K620
- Stage 2 lift w/ Factory Series – Part Number: K623
- Tundra Rear Mini Pack - Part Number: 2000
- Stage 3 lift w/ Factory Series – Part Number: K625
