Fox Factory Race Series shocks for the Gen 1 Ford Raptor are no joke. The front 3.0 Internal Bypass Coilover shocks add 60% more damping area for maximum control. Massive 2.5-inch remote reservoirs keep the coilovers cool no matter how hard you run them. DSC adjusters are included for fine-tuning of high- and low-speed compression. The coilovers come preset from the factory to level the Raptor right out of the box but are also adjustable. The front shocks use bypass technology to give a supple ride in normal terrain while considerably ramp up damping force when the going gets rough. Fox's Factory Race Series shocks will add even more capability, control, and comfort to your Ford Raptor.
- 3.0-inch diameter bodies for more fluid capacity, better cooling, and more damping
- A 60% increase in damping area over the factory shocks
- Front shocks bolt into stock mounts and locations
- 2.5-inch diameter reservoirs for maximum cooling
- The front coilovers are preset to level the Raptor
- DSC adjusters on the front coilovers allow for fine-tuning of high- and low-speed compression
- Front Pair Fox Factory Race Series Shocks w/ DSC Adjusters
- 883-06-046 x 1 Pair (Front 0-2”)
Q: What height do the shocks come out of the box?
A: Typically, Fox Shocks will be pre adjusted to the highest setting per application. Example if the coilover is 0-2”, our experience shows that out of the box the vehicle will net close to 2” of lift. Fine tune adjustment can be made once installed.
- Elevate Billet Uniball / Heim UCA – Part Number: 1001
- Stage 1 Lift w/ Factory Series Gen 1– Part Number: K210
- Stage 3 lift w/ Factory Series Gen 1– Part Number: K211
